Does Halo Subterra or Subterra Plus Qualify as Waterproofing or Damp Proofing for Below Grade Walls Per Building Code?
Does Halo Subterra or Subterra Plus Qualify as Waterproofing or Damp Proofing for Below Grade Walls Per Building Code? No. Halo Subterra and Subterra Plus do NOT qualify as a water proofing or damp proofing layer in a below grade wall assembly. A separate water proofing or damp proofing layer must be installed against the […]
Calculating The Load Capacity of Subterra Products By Using Our Load Chart
Our Technical Department often gets asked questions about load capacity guidelines for our Subterra products and in response to these inquiries Logix Brands has just published this technical bulletin on the subject – Halo Technical Bulletin 15 – Subterra Load Ratings. The essence of this technical bulletin is a visual Load Chart that our technical […]
What is sufficient PSI for underslab insulation to accommodate a 7,000-pound truck and a 9,500-pound skid steer?
What is sufficient PSI for underslab insulation to accommodate a 7,000-pound truck and a 9,500-pound skid steer? The sufficient PSI for underslab insulation to accommodate a 7,000-pound truck or a 9,500 skid steer loader is 16 PSI. This value accounts for the point loads imposed by the truck and the skid loader as well as […]
How to Determine The Correct Foam Board Insulation Thickness For Your Project?
Foam board insulation is an essential component in any wall assembly — it boosts R-values, helps manage moisture build up in the wall cavity and eliminates thermal bridging. But how thick should your layer of rigid insulation be? The answer hinges on nine general factors that determine the required thickness of foam board insulation on […]
Does Halo Subterra Protect Against Carpenter Ants?
3. Install Inspection Strips
Inspection strips allow you to visually inspect the home’s sill plate and rim joist for signs of termites or carpenter ants. This way, you can catch an infestation and call in pest control before excessive damage occurs.
Controlling Radon With Halo Subterra Plus
Radon is a hazardous, radioactive gas that’s prevalent across much of North America. But while our building codes have a working solution, what if we told you that there’s a product that performs 7 times better at stopping Radon ingress? This post will examine the test results comparing the Radon-retarding properties of Halo’s Subterra Plus versus the current code requirement.
No, We’re Not Type 4 XPS
Why Halo’s 16 PSI Subterra Plus Is the Better Alternative for Your Project Whether you’re a builder or an architect, you know that some products have a way of making it into specs and turning up in project after project. Often this can happen with no code requirement or any actual edge over other products. […]
