Renovations With Halo Interra: Insulating Tricky Surfaces & Beefing Up Your Walls

Email
Download

Are you thinking about renovating your ceiling or interior walls? Slapping on a fresh new finish is a noticeable improvement, but have you thought about improving your walls’ thermal performance and slashing energy use?

The case study below will dissect a recent project where Halo’s Interra panels played a crucial role in boosting a home’s energy efficiency and making installation that much more straightforward.

Jay Mincho’s Cabin — A Case Study

Jay Mincho’s cabin is perched on the shores of Lake Manitoba in Steeprock, MB. The 1,030 ft2, 2-bedroom, 2-bathroom cabin with cathedral ceilings was a new build — but we’ll profile it here because the same Interra application easily applies to renovations.

Interra On Cabin Ceiling

Simplify Insulation For Challenging Wall Assemblies

For his project, Jay Minho chose to insulate the cabin’s expansive cathedral ceilings with Halo’s Interra. He used the same product under the loft’s flat ceilings and in the feature prow wall.

And for a good reason — Interra panels come with an integral vapor barrier. And of course, it’s much simpler to fasten 4’ x 8’ rigid boards to sloping surfaces than to cover these surfaces with rolls of poly — all while working from a 13-foot tall scaffolding.

Jay is also happy with the other great benefit he got — Interra also added crucial thermal resistance to the cabin’s prow wall.

Thermal Insulation Using Halo Interra

Add R-Value and Eliminate Thermal Bridging

The feature prow wall’s studs created massive amounts of thermal bridging, so Jay created a powerful, airtight thermal break by applying another layer of continuous insulation (Interra) on the inside and beefing up the wall assembly’s R-Values. Here’s an infrared photo illustrating just how much of a difference this layer of Interra made in thermal bridging. These shots were taken with an outdoor temperature of about 0°C, and roughly 12°C inside.

Thermal Insulation Using Halo Interra

Remember to Seal the Edges!

To ensure that his Interra approach met the local code vapor barrier requirements, Jay had to seal the edges with blue tuck tape (which is rated as a vapor barrier in Canada).

He also taped the ceiling perimeter and around door and window openings with 3M 3015 tape and blind-caulked the connection. At the edge where the prow wall met the ceiling, Jay lapped the Interra with the wall’s vapor barrier, then taped the connection and face-caulked it with an acoustical sealant.

Jay finished the ceiling and prow wall with 1×6 tongue-and-groove pine boards, nailed with 16-gauge 2.5-inch Brad nails.

No Need for Overkill

With all of the tricky parts covered, Jay opted not to use Interra on the regular exterior wall; a layer of Exterra on the outside and batt in the stud bays were sufficient. Likewise, Jay left his demising walls without Interra.

Sealed Edges With Halo Interra
Sealed Edges With Halo Interra

Cabin’s Wall Assemblies and Interra Quantities

Here’s what Jay’s finished wall assemblies ended up comprising:

Feature prow wall assembly

  • 1×6 tongue-and-groove pine boards
  • 1” Interra board
  • 2×6 stud with R-20 fiberglass batt insulation
  • 7/16” OSB sheathing
  • 1 ½” Exterra board
  • Vinyl siding

Ceiling assembly

  • 1×6 tongue-and-groove pine boards
  • 1” Interra board
  • Parallel scissor truss with R-40 fiberglass batt insulation
  • Air space
  • ½” Plywood
  • Owens Corning duration shingles

To give you an idea of how much Interra Jay needed for this project — and how much you’d need for a similar renovation — here are his quantities:

 

  • Ceilings ~ 815ft2
  • Prow wall ~ 205ft2

 

The material costs for Interra were relatively minimal for Jay, amounting to around 0.4% of the total construction expenses. Of course, this percentage will likely be much higher if all you’re doing is giving your walls and ceiling a facelift.

Wrapping It Up

As you can see from the case study above, insulating your wall with Halo’s Interra can offer 2 significant benefits during a renovation. It eliminates the need for a separate vapor barrier (as long as you tape the edges), making the installation process that much easier. But it also gives you a much better wall (or roof); the layer of continuous insulation adds critical R-Value to the assembly AND creates an effective thermal break.

Latest Posts
Insight. Advice. Inspiration.
Subscribe to our newsletter and stay informed with the latest from Halo
Halo® is the Advanced Graphite Insulation System that’s designed perfectly for specific applications. Each Halo® product features a high-performance graphite polystyrene core, plus an ingenious laminate surface that is customized to its precise usage application, giving you today’s most advanced rigid insulation envelope.
If you want help with or more information about the issues we blog about, then let’s talk.

Also See

How Continuous Insulation Helps You Keep up With the Energy Codes

Adding Continuous Insulation, such as Halo’s Exterra, to your wall assembly can simplify your path to code compliance. Apart from helping you keep up with the evolving energy code regulations, designing walls with CI like Exterra can also lessen the load on your conditioning systems and save valuable resources.

Read More »

Don’t Miss a Thing!

General Inquiries

Whether you are just starting out or well on your way toward your next big project, we would love to hear from you. 

By submitting the form, you agree to our Terms and Conditions and our Privacy Policy. This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

 

Search Anything

Almost there...

For unlimited access to all of our technical and marketing resources, please enter your information. We will also email you a copy of each of the items you select for quick future reference.

By submitting the form, you agree to our Terms and Conditions and our Privacy Policy. This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.