How to Install Foam Board Insulation

Email
Download

Halo®’s rigid insulation products are a great fit for various residential uses, including:

  • Under concrete slab
  • Exterior below-grade concrete wall
  • Exterior above-grade wood-framed wall
  • Interior concrete wall
  • Interior wood-framed wall

And did you know that in most cases, these boards are super-easy to install? This post will provide a quick summary of the installation and fastening requirements for these typical applications.

Under Concrete Slab

Halo’s Subterra series insulation is designed explicitly for under-slab applications. It’s laminated on both sides for extra jobsite durability, keeps away moisture, and provides R-5 per nominal inch. Subterra Plus even serves as a highly effective Radon barrier as well.

When you install Subterra under a slab, it’s vital to look out for protrusions that could damage the boards. To this end, be sure to check the compacted soil or granular material for any items that could penetrate the foam.

Slab Pressure on Subterra
Subterra Under A Concrete Slab

Once you’ve confirmed that the base surface is smooth and clear, simply lay down the Subterra boards — any orientation will do — and see to it that the panels abut each other tightly at their edges.

Finally, apply acoustic sealant between the Subterra boards and the footing and seal all joints with sheathing tape (those wider than ¼-inches should be filled with foam). Now you’re ready to pour the slab!

Exterior Below Grade Concrete Wall

Thanks to the polypropylene laminate on both sides of the foam core, Subterra offers stellar moisture-resistive properties that make it a perfect fit for below-grade concrete walls.

 

Before installing Subterra on a concrete wall, make sure that the waterproofing surface is smooth and, again, free of items that could damage the foam. If you’re insulating an existing wall, take the time to remove any backfill from the waterproofing film’s surface so that the panels fit flush to it.

Subterra With Backfill
Subterra With Backfill

If you’ve managed to get the surface nice and even, simply use a weather-resistant glue, such as PL 300, to attach Subterra to the walls. On the other hand, if the concrete beneath the waterproofing membrane is too uneven, then you’ll have to use concrete screws and washers in conjunction with the adhesive.

Should you have to rely on screws, be sure to seal the penetrations with the same sheathing tape you’ll use to seal the joints between the Subterra boards. This step is crucial for maintaining Subterra’s moisture-resistance.

Likewise, you should use the sheathing or flashing tape to seal window and vent openings — this will prevent moisture from building up inside the wall assembly. In cold weather applications, you may have to use a water-based primer to ensure proper adhesion between the tape and the Subterra surface.

Once the insulation boards are fastened to the wall, taped, and sealed, you can go ahead and place the backfill.

Exterior Above Grade Wood-framed Wall

Halo’s Exterra® is water-resistive yet breathable — a unique property that stops vapor and build-up inside wall cavities and makes the product perfect for exterior applications.

If you’re applying Exterra to the sheathing, the fasteners you use should be long enough to completely penetrate the insulation board and the wood sheathing. The table below will help you to determine these lengths:

When installing Exterra over studs, the fasteners should penetrate at least ¾-inches into the studs or blocking. Here’s a table to help you find the correct fastener size:

As long they meet the length and penetration requirements, you can use a wide variety of faster types, including:

  • plastic cap nails
  • roofing nails with at least ½-inch diameter washers
  • cap staples
  • wood screws with metal roof washers

Regardless of the fastener type and length, you can minimize their locations to the edges of the Exterra board corners — along with cladding and strapping, this will be enough to secure the boards in place.

Interior Concrete Wall

The Interra series has a built-in vapor barrier — a film applied to both sides of the foam core that can also reflect heat back into the home. Interra Plus can also be used in most US jurisdictions as an ignition barrier, so you don’t have to install drywall over it to meet the code. With these key features, Interra is tailor-made for interior applications.

Halo Interra Inside Wall Section
Halo Interra Inside Wall Section

Applying Interra panels to interior concrete walls — such as the walls of a basement — is a simple process, as long as the concrete surface is free of potentially damaging protrusions. If there’s nothing on the wall that could damage the Interra boards, simply secure them to the wall with an EPS-compatible glue, such as PL 300. If the concrete surface is too uneven, however, use concrete fasteners with washers alongside the glue. If you choose the latter option, seal the fastener penetrations in Interra with the same tape you’ll use on the joints — this will allow the boards to keep their vapor-resistant properties. 

Interior Wood-framed Wall

You’ll need to use fasteners to install Interra to the interior face of a stud wall. The screws must be embedded at least ¾-inch into the stud, so please refer to the table to find the correct screw size:

To ensure that the Interra panels still serve as a vapor barrier, don’t forget to tape over the screw penetrations with the same tape you’ll use to seal the joints.

Wrapping It Up

Halo’s insulation products are well-suited for several common residential applications. They provide top thermal resistance values, durability, flexibility, and other characteristics that can make your structure more comfortable and energy-efficient. Best of all — these insulation boards are easy to install! Just make sure that you follow the correct fastening procedures we described in this quick guide.

Latest Posts
Insight. Advice. Inspiration.
Subscribe to our newsletter and stay informed with the latest from Halo
Halo® is the Advanced Graphite Insulation System that’s designed perfectly for specific applications. Each Halo® product features a high-performance graphite polystyrene core, plus an ingenious laminate surface that is customized to its precise usage application, giving you today’s most advanced rigid insulation envelope.
If you want help with or more information about the issues we blog about, then let’s talk.

Also See

How To Install Exterra In A Retrofit With Vinyl Siding

If the existing walls do not have a layer of structural sheathing, they may require bracing per local building codes. If corner bracing is used, you will need to take steps to ensure all Exterra panels are flush with those Exterra panels installed at the corners.

Read More »
Subterra Installation

Performance of Thermal Insulation on the Exterior of Basement Walls

EPS and EPS-based insulation (such as Halo Subterra) is able to keep water away from a basement’s concrete wall. Of course, this doesn’t mean that other waterproofing methods shouldn’t be in place. But, this finding does mean that EPS insulation can perform both of its design functions — slowing heat transfer and groundwater management — very well.

Read More »

Don’t Miss a Thing!

General Inquiries

Whether you are just starting out or well on your way toward your next big project, we would love to hear from you. 

By submitting the form, you agree to our Terms and Conditions and our Privacy Policy. This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

 

Search Anything

Almost there...

For unlimited access to all of our technical and marketing resources, please enter your information. We will also email you a copy of each of the items you select for quick future reference.

By submitting the form, you agree to our Terms and Conditions and our Privacy Policy. This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.